For companies seeking secondary, overroll or prime quality cold rolled coils, tin mill black plate (TMBP), steel sheets, slit coils or hot rolled coils the following lots are available on a regular basis.

If you have steel demand needs or are a steel supplier interested in exporting to customers in Vietnam, please send your inquiries to trade@mekongresearch.com.


Cold rolled material with very thin thickness
Material comes from mills producing tin plate
Thickness 0.15 - 0.40 mm (mainly 0.28mm max)
Width 600 mm and more
Cwts 0.7 - 3.0 Tons per coil
Material is soft commercial grade skimpassed and non skimpassed
Coils are formed with one thickness, one width, without welds

 

Thickness 0.15 - 0.40 mm (Majority is 0.20 to 0.25/26)
Width 600 mm and more
Cwts 700 - 10.000 kg
Soft commercial grade

Cold rolled material with very thin thickness
Material comes from mills producing tin plate
Thickness 0.15 - 0.40 mm (mainly 0.28mm max)
Width 600 mm and more
Cwts 1.5 - 8.0 tons x coils
Normally around 25% in a lot are in coils with weight between 1.5 - 2.5 and 75% are in coil weight btween 2.5 - 8.0
Material is soft commercial grade skimpassed
Coils are formed with more thickness and width welded together

  

Thickness 0.40 - 2.00 mm (mainly 1.20 mm maximum)
Width 600 mm and more
Cwts 0.8 - 8.0 Tons per coil
Material is full hard
Coils are formed with one thickness, one width, without welds

Thickness 1.80 - 3.20 mm
Width 600 mm and more
Cwts 2.5 - 20 Tons per coil (If necessary can limit the coil weight to maximum of 10-12 tons per coil in case of problems handling bigger coils.)
Material is soft commercial grade
Coils are formed with one thickness, one width, without welds

  

Thickness 0.25 - 2.00 mm (mainly 1.00mm max)
Width 600 mm and more
Cwts 0.5 - 8.0 Tons per coil
Normally colour coated coils are small (around 1.0 tons per coil) while galvanized are bigger ( 1.5 tons per coil and above)
Coils are formed with one thickness and width without welds
Shipments can be entirely of galvanized coils, or mix of galvanized and color coated coils. Color coated coils usually make up no more than 20% of total lot.

Thickness 0.25 - 2.00 mm (mainly 1.20 mm max)
Width 600 x 1500 mm abt and more
Material is soft commercial grade skimpassed
Bundles are fully unassorted. Majority of product is cold rolled, with a mix of hot rolled sheets and coated (galvanized and color coated) sheets


Thickness 0.25 - 2.99 mm (mainly 0.40 - 1.50 mm)
Width 600 mm and lower (material is mainly 50 - 400 mm)
Coatings: Majority is cold rolled and galvanized with some color coated and some hot rolled.

 
  Copyright 2015 Mekong Research All Rights Reserved.